BCTGT - IMPCO CURING AGENT #90
- MSDS: BCTGT
- Manufacturer: IMPCO INC
- Product Name: IMPCO CURING AGENT #90
- National Stock Number: 8030-00N009783
Product Identification
Product ID:IMPCO CURING AGENT #90
MSDS Date:06/17/1986
FSC:8030
NIIN:00N009783
MSDS Number: BCTGT
Responsible Party
PROVIDENCE, RI 02908
Emergency Phone: 401-521-2490
Info Phone: 401-521-2490
Preparer: MICHAEL BALLOU
Cage: HO500
Contractor
Telephone: 401-521-2490
Cage: HO500
Ingredients
POLYALKYLENE GLYCOL
CAS: 9038-95-3
RTECS: RR0550000
Fraction By Weight: 100%
ETHYLENE OXIDE (SARA III)
CAS: 75-21-8
RTECS: KX2450000
Fraction By Weight: TRACE
OSHA PEL 1 PPM; SEE 1910.1047
ACGIH TLV: 1 PPM, A2; 9192
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
Hazards
LD50 LC50 Mixture:
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:PROLONGED OR REPEATED EXPOSURES TO
VAPORS GENERATED AT HIGH TEMPERATURES MAY RESULT IN EYE AND
RESPIRATORY TRACT IRRITATION AND IN THE INHALATION OF HARMFUL
AMOUNTS OF MATERIAL.
Explanation of Carcinogenicity:IARC:PROBABLE HUMAN CARC. NTP:REASONABLY
ANTICIPATED TO BE CARC. OSHA. CARC HAZ. ACGIH:A2 SUSPECTED CARC.
Effects of Overexposure:PROLONGED OR REPEATED EXPOSURES TO VAPORS
GENERATED AT HIGH TEMPERATURES MAY RESULT IN EYE AND RESPIRATORY
TRACT IRRITATION AND IN THE INHALATION OF HARMFUL AMOUNTS OF
MATERIAL.
Medical Cond Aggravated by Exposure:N/K
First Aid
First Aid:INHALATION:REMOVE TO FRESH AIR. SKIN:WASH WITH SOAP AND
WATER. EYE:FLUSH FOR 15 MINUTES WITH FRESH WATER.AND SEEK MEDICAL
ATTENTION. INGESTION:NO HARMFUL EFFECTS EXPECTED(MFR).
Fire Fighting
Flash Point Method:PMCC
Flash Point:316 F
Extinguishing Media:ALCOHOL TYPE OR ALL PURPOSE-TYPE FOAMS APPLIED BY
MFR'S REC TECH FOR LG FIRES,CO*2/DRY CHEMICAL FOR SMALL FIRES.
Fire Fighting Procedures:DON'T SPRAY A SOLID STREAM OF WATER OR FOAM
DIRECTLY INTO A POOL OF HOT,BURNING LIQUID.THIS COULD CAUSE
FROTHING.USE SCBA AND PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:NONE LISTED BY MFR.
Accidental Release
Spill Release Procedures:SMALL SPILLS CAN BE FLUSHED W/ LARGE AMOUNTS
OF WATER. LARGE SPILLS SHOULD BE COLLECTED FOR DISPOSAL.
Neutralizing Agent:
Handling
Handling and Storage Precautions:AVOID CONTACT WITH EYES,SKIN AND
CLOTHING.WASH THOROUGHLY AFTER HANDLING.
Other Precautions:PROD MAY CONTAIN TRACE AMT ETHYLENE OXIDE POT FOR
ACCUM IN THE HEAD-SPACE OF SHIPPING & STORAGE CONTR OF ENCLOSED
AREA.IF THE PROD IS HANDLED ACCORDING TO THE RECOMD OF THIS
MSDS.THE PRESENCE OF TRACE AMTS OF ETHYLENE OXIDE IS NOT(SUP DATA)
Exposure Controls
Respiratory Protection:NONE REQUIRED FOR USE AT LOW
TEMPERATUERES(MFR).IF DETERMINED THERE IS A REQUIREMENT,USE
RESPIRATORY PROTECT.APPROPROPRIATE FOR EXPOSURE OF CONCERN
Ventilation:GEN RM VENT IS SAT FOR USE AT LOW TEMP.IF USED AT HIGH
TEMP,SPECIAL LOCAL VENT IS RECOM,WHERE VAPOR ESCAPE TO WORK PLACE
Protective Gloves:PVC COATED.
Eye Protection:MONOGOGGLES.
Other Protective Equipment:EYE BATH AND SAFETY SHOWER.
Work Hygienic Practices:OBSERVE GOOD WORK HYGIENIC PRACTICES.
Supplemental Safety and Health
MAT TO AVOID:COMPOUNDS.OTHER PRECAUTIONS:EXPECTED TO RESULT IN ANY
SHT/LONG TERM HAZ. ETHYLENE OXIDE IS CONSIDERED BY OSHA A POT CARC
FOR HUMANS.STORAGE & DISTR FACIL COMPLY W/ OSHA STD (29CFR 1910.10
47).PERSONNEL SHOULD BE MONITERED.A SUFFICIENT TIME TO DET IF EXPOS
ABOVE PERMISSIBLE LEVELS OF 1PPM TWA8.,0.5PPM TWA8.
Chemical Properties
Boiling Pt:B.P. Text:>392F>200
Melt/Freeze Pt:M.P/F.P Text:
Decomp Temp:Decomp Text:
Vapor Pres:NIL
Vapor Density:>1(AIR=1)
Spec Gravity:1.039
pH:
Evaporation Rate & Reference:NIL(ETHER=1)
Solubility in Water:100% @ 20 C
Appearance and Odor:AMBER LIQUID;CHARACTERISTIC ODOR.
Percent Volatiles by Volume:
Corrosion Rate:
Stability
Stability Indicator/Materials to Avoid:YES
NORM UNREAC;HOWEVER,AVOID STRG BASES AT H TEMP.STRG ACIDS,STRG
OXIDIZING AGENTS & MAT REACTIVE W/ HYDROXYL (SUP DATA).
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:BURNING CAN PRODUCE CO AND/OR CO*2.
Conditions to Avoid Polymerization:WILL NOT OCCUR (MFR).
Disposal
Waste Disposal Methods:INCINERATE IN A FURNANCE WHERE PERMITTED UNDER
APPROPRIATE FEDERAL,STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.